Genuine Chromcraft replacement parts restore vintage dining sets to lasting functionality. You know that feeling when a beloved chair starts to wobble or the fabric frays? It’s frustrating. But don’t toss that set just yet. Tracking down the right chromcraft chair parts is easier than you think. With exact-fit components, you can breathe new life into those sturdy frames. It’s all about keeping what works—the classic style—and just swapping out what’s worn.
Think of it like restoring a classic car. You don’t replace the whole thing when a tire goes flat. Same goes for your dining set. A new seat pad or a replacement glider can make that chair feel brand new again. You’ll save money and keep a piece of mid-century charm in your home. Plus, the satisfaction of fixing it yourself is unbeatable. Just measure twice and order once—you’ll be back to hosting dinners in no time.
Product Comparison Table: 9 Best Chromcraft Chair Parts
| Image | Why We Like This Product | Editor’s Rating | |
 |
Oajen 2″ Chair Caster Wheel Chromcraft, tan, 7/16″ x…
|
9.7 |
Read Review |
 |
Chromcraft Set of 4 Bell Glides Replacement Chair Stem…
|
9.5 |
Read Review |
 |
Chromcraft Set of 4 Chair Casters Replacement Rolling Chair…
|
9.3 |
Read Review |
 |
Chromcraft Swivel Tilt Mechanism Replacement Part for Caster Chair
|
9.1 |
Read Review |
 |
#805CC – Chromcraft Swivel Tilt Mechanism – Heavy Duty…
|
8.9 |
Read Review |
 |
Chromcraft Almond Casters Set of 4 OEM
|
8.8 |
Read Review |
 |
SET OF 4 ALMOND CHROMCRAFT CASTERS
|
8.6 |
Read Review |
 |
#805CNB – Chromcraft Swivel Tilt Mechanism – Heavy Duty…
|
8.4 |
Read Review |
 |
Caster Chair Company Chromcraft Replacement Bell-Shaped Rolling Caster Castor…
|
8.2 |
Read Review |
Quick Review For Top 9 Chromcraft Chair Parts
Oajen 2" Chair Caster Wheel Chromcraft, tan, 7/16" x 7/8" or 11mm x 22mm Grip Ring stem, Pack of 5
The Oajen 2″ Chair Caster Wheel Chromcraft, tan, 7/16″ x 7/8″ or 11mm x 22mm Grip Ring stem, Pack of 5 is a straightforward replacement part for your dinette or office chair. These casters are designed to work specifically with a grip ring stem, which measures either 7/16 inch by 7/8 inch or 11 millimeters by 22 millimeters. You will want to measure your existing stem to make sure it fits before you buy.
The wheel itself is 2 inches in diameter, and it comes in a tan color that is similar to what you would find on Chromcraft dinette chairs. Keep in mind that the actual color might look a little different depending on your computer monitor, so it is a good idea to check a sample if color matching is critical for you.
These are hard wheels, which means they are intended for use on carpet. Do not use them on hard floors like tile or hardwood, because they can scratch or leave marks.
The caster is actually the original equipment manufacturer (OEM) part for Douglas dinette sets, so if you own one of those, this is likely a direct replacement. The set comes with five casters, so you can replace all the wheels on a standard five-legged chair base at once.
In terms of quality, these casters exceed BIFMA standards, which is the industry benchmark for durability and safety in office furniture.
Chromcraft Set of 4 Bell Glides Replacement Chair Stem Casters Replacement Stationary Chair Casters for Chairs and Tables(Black)
The Chromcraft Set of 4 Bell Glides Replacement Chair Stem Casters are here to solve a simple problem. Maybe you are tired of your office chair rolling away when you stand up. Or perhaps you need your dining chairs to stay put on a hardwood floor. Whatever the reason, these stationary casters turn your rolling chair into a fixed one. They act as a chair and table stopper, which is great for homes with kids or pets.
You get more stability without any fuss.
These are universal chair casters, so they should fit most standard chairs. The caster pole measures 7/16 inch (11mm) by 7/8 inch (22mm). Just make sure your chair has a matching stem size. Keep in mind, they are not suitable for IKEA chairs. If you own an IKEA model, you will need to look for a different solution. For everyone else, the install process is quick. You just pull out your old rolling caster and push this new bell glide into place.
No tools are required.
These casters hold a maximum of 300 lbs total weight. That covers most office chairs, dining chairs, and small tables. Since they are stationary and fixed, you will not get those annoying squeaks that rolling casters sometimes make. The design is simple, and it works. The premium material and craftsmanship mean they should last you a long time.
Chromcraft Set of 4 Chair Casters Replacement Rolling Chair Wheels for Chairs and Tables(Black)
The Chromcraft Set of 4 Chair Casters Replacement Rolling Chair Wheels in Black is a straightforward upgrade for your office or home chair. These are universal casters designed to fit most standard chairs, but you should check the size first. The caster pole measures exactly 7/16 inch (11mm) by 7/8 inch (22mm). Just a heads up, they are not suitable for IKEA chairs, so if you have one of those, this set won’t work for you.
These wheels use a double soft wheel design.
That means they are gentle on your floors. Whether you have hardwood, laminate, tile, or carpet, these casters will minimize scratches and scuffs. You can roll around without worryng about damaging the surface. The soft material also helps with noise reduction.
Speaking of noise, these casters are built for ultra mobility and silence. They move with ease across the floor, so you won’t hear that annoying rattle or squeak. Each caster can hold up to 300 lbs total weight across the set.
That is plenty for most desk chairs and even some light furniture like small tables. The movement is smooth and gliding, making it easy to shift positions without a lot of effort.
The build quality is solid. Chromcraft uses premium material and craftsmanship to ensure these wheels last a long time. They feel sturdy in the hand, and the black finish looks clean and professional.
Chromcraft Swivel Tilt Mechanism Replacement Part for Caster Chair
The Chromcraft Swivel Tilt Mechanism Replacement Part for Caster Chair is designed specifically to restore function to your older seating. This is a direct adapter kit for vintage Chromcraft chairs and bar stools. It comes with one complete Swivel Tilt Mechanism Adapter Kit. You get everything needed for the swap. This part is guaranteed to fit all older model Chromcraft chairs and bar stools. It will not work with newer models or other brands, so check your chair’s age.
The fit is precise because it matches the factory dimensions. The seat mounting hole bolt measurement from the front of the knob horizontally is 6 1/2 inches. The seat mounting hole bolt measurement from the back of the shaft horizontally is 7 1/4 inches. Measure your current setup to confirm these numbers. The tilt tension is adjustable. You can turn a knob to make the rocking motion stiffer or looser. This gives you control over how the chair feels.
The mechanism also provides a full 360 degree swivel. You can spin freely in any direction. Be aware that the swivel might be a little tight at first when it is new. This is normal. It will definitely loosen up with usage as the bearing surfaces break in. Give it a week or two of regular sitting and turning. The steel shaft is 1 inch in diameter. This is a standard size for older Chromcraft units. The build is all metal, so it is durable. There are no plastic parts to crack.
#805CC – Chromcraft Swivel Tilt Mechanism – Heavy Duty Swivel – 500 lbs Weight Limit – Hole to Hole – Front 6 1/2" – Back 7 1/4" – Includes 2, #218B Inserts – Made USA – Made to Last – Rated No. 1
The #805CC Chromcraft Swivel Tilt Mechanism is a heavy duty replacement part built for the long haul. This is the real deal. X-treme Swivels is the only company that makes and sells this specific mechanism. No one else is authorized to distribute it. You wont find it on Walmart. If you need a Chromcraft swivel that is strong and will outlast the standard versions, this is the one to get.
The key difference is in the construction. The swivel mechanism is formed, not welded.
That means there are no welds to crack or break over time. It uses a solid square 11 gauge thick steel plate for superior support. The plate is 8th of an inch thick. It also has a solid 1 inch diameter shaft and a stronger pivot pin than the original manufacture used. This is built to handle real weight. The weight limit is 500 lbs, so it works for heavier chairs or daily commercial use.
You get two pieces of the original 2 inch diameter seat post bushing plastic inserts included.
These are the #218B inserts. They help keep the chair post secure and reduce wobble. The mechanism also raises your chair 3/4 inch taller than the original Chromcraft swivel tilter that has been discontinued by the manufacturer. That small height difference can make sitting at a counter or bar more comfortable.
The hole to hole measurements are front 6 1/2 inches and back 7 1/4 inches. This is designed to fit the original older models of Chromcraft kitchen, dining, and barstool chairs.
Chromcraft Almond Casters Set of 4 OEM
The Chromcraft Almond Casters Set of 4 OEM is a direct replacement kit designed for office and dining chairs that use a standard grip ring stem. If you have a chair that has lost a wheel, or if the old casters are scratched and worn, this set gives you four brand new units to swap in. These are original equipment manufacturer parts, so the color and build match what came on many factory chairs. Let’s look at the key features. First, you get four new OEM Chromcraft Almond casters.
The almond color is a neutral beige tone that fits well with wooden chairs and many office furniture finishes. These are not universal replacements, but they are made to work with a wide range of popular chair brands. According to the specs, this caster may fit chairs from Douglas, Callee, Tempo, Stoneville, Tobias, and Cal Style. If you have a chair from one of those makers, there is a good chance these will slide right in. The floor compatibility is a major plus.
These casters work great on tile, slate, wood, and laminate floors. That covers most hard surfaces you would find in a home or office. You won’t have to worry about scratching your floor boards or leaving scuff marks on tile. The wheels are made of a soft material that rolls smoothly without damaging the surface underneath. Now for the technical details. The grip ring stem is 7/16 inches in diameter and 7/8 inches long. That is a common size for many standard chairs.
SET OF 4 ALMOND CHROMCRAFT CASTERS
The Set of 4 Almond Chromcraft Casters are the exact replacement wheels used on brand new Chromcraft chairs. If you own a Chromcraft chair and the original casters have worn out or stopped rolling smoothly, these are the ones you need. They are not a generic substitute. They are the standard, factory-spec part.
Each caster features a dual 1 3/4 inch wheel made from polyurethane. This material is softer than the hard plastic found on many standard casters.
Because it is softer, it grips the floor better and moves more quietly. The softer wheel also means it will not scratch or scuff your floors, as long as you keep the floor clean. Dirt or grit under the wheel can still cause marks, but the wheel itself is floor-friendly.
The casters rotate a full 360 degrees. This gives you smooth movement in any direction without any sticking or catching. You can roll forward, backward, or sideways with equal ease.
The swivel action is fluid, so you won’t feel any jerky stops when changing direction. This makes it easy to move around your desk or workspace without having to lift the chair.
Installing these casters is simple. You just pull out the old casters from the chair legs. Then you take the new Almond Chromcraft Casters and push them into the holes. You can use a rubber hammer to tap them in, or you can push them in by hand if you have enough strength.
#805CNB – Chromcraft Swivel Tilt Mechanism – Heavy Duty Swivel – 500 lbs Weight Limit – Hole to Hole – Front 6 1/2" – Back 7 1/4" – No Bushings Included – Made USA – Made to Last – Rated No. 1
The #805CNB – Chromcraft Swivel Tilt Mechanism is a heavy duty replacement part built for serious longevity. This unit is made and sold exclusively by X-treme Swivels, so you are getting the real deal, not a knock off. If you need a swivel that can handle a 500 lb weight limit, this is the one to get. The design is simple and strong. The swivel mechanism is formed directly into the plate, not welded. That means there are no welds to crack or break over time.
This is a big upgrade over standard Chromcraft parts that rely on weak weld points.
You will notice the solid square plate is made from 11 gauge thick steel. That is nearly an eighth of an inch thick, giving you superior support for the heavy duty swivel. It also has a solid 1 inch diameter shaft and a stronger pivot pin than the original manufacturer used. This mechanism is made in the USA and it is rated number 1 for a reason.
It is built to last way longer than the standard Chromcraft swivel tilter that you might find in older chairs.
One important detail: this part does not include a seat post bushing. If you need the bushing, look for the #805CC model which comes with two seat post bushings, or you can buy them separately. Also, be aware that this replacement swivel will raise your chair by about 3/4 of an inch. That is because it is taller than the original discontinued part.
Caster Chair Company Chromcraft Replacement Bell-Shaped Rolling Caster Castor Chair Wheels Stationary Converter Glides (Set of 4)
The Caster Chair Company Chromcraft Replacement Bell-Shaped Rolling Caster Castor Chair Wheels Stationary Converter Glides (Set of 4) are designed to solve a very specific problem. If you are tired of your office chair rolling away from you on smooth floors, this product offers a simple fix. These are not your average caster wheels. Instead, they convert your rolling chair into a stationary one.
You get four glides that replace your existing wheels.
These glides are perfect for protecting your flooring. They work on hardwood, tile, vinyl, and even carpet. The stationary design means your chair stays put when you sit down. No more drifting when you lean forward to grab a file. The bottom of each glide has a soft coating that prevents scratches and scuffs. You can feel confident using them on delicate surfaces like bamboo or laminate.
Stability is a key feature here.
Each glide has a widened 2 inch base diameter. This gives you a larger footprint compared to standard wheels. Your chair will feel more grounded and less tippy. Despite the wider base, the overall height of the chair stays the same. You wont have to readjust your desk height or worry about your leg position. The design keeps your seating ergonomics intact.
The glides are made from durable hard plastic. The outer coating is soft to protect your floors but tough enough to last.
Chromcraft Chair Parts Buying Guide
Find the exact replacement parts you need for your chromcraft chair parts. That squeaky wheel, wobbly base, or torn cushion doesn’t mean you need a whole new chair. Fixing what’s broken is often cheaper and faster. But sorting through all the options can be a headache. This guide walks you through the key parts you might need, so you can get your chair back in action without the frustration.
Chair Bases and Swivels
Is your chair wobbling or tilting oddly? The base or swivel mechanism is probably the culprit. Look for a base that matches your chair’s star pattern—typically 4 or 5 legs. Check the diameter too. Swivels wear out over time, causing that annoying side-to-side play. Replacing just the swivel can fix the whole issue. Measure the mounting hole pattern on your old part before ordering.
Gas Cylinders and Lifts
When your chair sinks slowly or won’t stay up, the gas cylinder is failing. This is a common fix. You need to know the correct stroke length and diameter. Most Chromcraft chairs use a standard size, but always double check. A new cylinder can cost less than a dinner out and saves you from buying a new chair. Watch for the right weight capacity too, especially for heavier use.
Armrests and Pads
Worn armrests make a chair look tired. Replacing them is simple if you can find the right shape and color. Some Chromcraft models have screw-on armrests, while others use clip-on designs. Check the bracket style under the old armrest. Foam pads can sometimes be swapped separately if the plastic base is still good. Measure the width and depth to be sure.
Castors and Wheels
Busted castors are the easiest part to replace. They come in different stem sizes—the part that goes into the chair base. Common sizes are 7/16 inch and 1/2 inch. Also decide between hard floor castors for carpet or soft ones for hardwood. Pull one out and measure the stem diameter and length. A set of four quality castors will make your chair glide smoothly again.
Cushions and Upholstery
If the seat or back cushion is flat or torn, you can find replacement foam and covers. Look for contoured foam that matches the original shape. Some sellers offer complete replacement kits with the foam and fabric together. Check the attachment method—some cushions snap on, others use screws from underneath. Color matching can be tricky, so request a fabric sample if possible.
Frequently Asked Questions About Chromcraft Chair Parts
What are the most common Chromcraft chair parts I might need to replace?
You often need new casters or glides first. The gas lift cylinders also wear out over time. Seat cushions and armrest pads are common replacements too. For vintage models, you might look for specific tilt mechanisms or base plates. These parts help your chair feel like new again.
How do I find the right Chromcraft chair parts for my model?
Check the label under your seat or on the base. It lists the model number. You can also measure key parts like the seat width and cylinder height. If you have a vintage chair, take a photo of the part you need. This helps you match it exactly. Many online stores let you search by model number.
Are Chromcraft chair parts interchangable with other brands?
Not usually. Chromcraft uses unique designs. Their gas cylinders and bases have specific sizes. Stick with parts made for Chromcraft chairs. Using generic parts might not fit right or could damage your chair. It’s safer to buy direct replacements.
How do I replace a Chromcraft chair gas cylinder?
First, flip your chair upside down. Use a rubber mallet to tap the old cylinder out. You might need a pipe wrench if it’s stuck. Slide the new cylinder into place. Make sure it clicks in securely. Always wear gloves to protect your hands. Watch a video tutorial if you’re unsure.
Can I buy Chromcraft chair parts for a broken armrest?
Yes, you can. Armrests are sold as complete pads or just the mounting brackets. Check if your armrest has screws or clips. Order the correct style for your model. Some newer chairs have adjustable armrests, so get the matching kit.
Where can I find affordable Chromcraft chair parts?
Online marketplaces and office furniture supply stores are good options. Look for sellers with good reviews. Compare prices but avoid very cheap parts—they might not last. Sometimes you can find discount codes for bulk orders. Always check return policies before buying.
Do Chromcraft chair parts come with a warranty?
Many sellers offer a 30-day to 1-year warranty on parts. Gas cylinders often have a 1-year warranty. Seat cushions might have a shorter period. Read the product description before you buy. Keep your receipt incase you need to claim the warranty later.
In Summary
Now you’ve got teh guide to keep that seat working like new. Finding the right pieces dosen’t have to be a headache. You can swap out worn armrests or fix a wobbly base without buying a whole new chair. Just check your model number first, order what fits, and get back to sitting comfortably. It’s that simple. Save money and time by fixing what you already own.
Every part matters. Whether you need a new gas lift, a set of casters, or a fresh seat plate, stick with quality that lasts. Your chair deserves parts made to match the original design. So go ahead. Restore your favorite seat with these exact, durable replacement pieces needed. You’ll find everything from bases to back supports when you search for chromcraft chair parts.