Replace your broken lift chair controller to restore full functionality. You don’t have to struggle with a stuck seat or finicky remote. A new lift chair controller brings back smooth operation and safety. It’s simple to install and saves you from buying an entierly new chair. We tested the top replacement options so you can find the best match for your model.
Your chair should work without a hitch. Swapping the controller fixes common problems like unresponsive buttons or jerky movements. You’ll feel the difference right away—smooth reclining and reliable lifting. Ready to get your chair back to normal? We’ll break down the best controllers for every need.
Product Comparison Table: 10 Best Lift Chair Controller
| Image | Why We Like This Product | Editor’s Rating | |
 |
Fresayerd Lift Chair Remote Replacement, 5 Pin 2 Lighted…
|
9.9 |
Read Review |
 |
Fromann Recliner Remote Hand Control 2 Button 5 pin…
|
9.7 |
Read Review |
 |
Fruhdi Lift Chairs Power Recliners 2 Button 5 Pin…
|
9.5 |
Read Review |
 |
CUGLB Lift Chair Remote Replacement, 5 Pin 2 Buttons…
|
9.3 |
Read Review |
 |
AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride…
|
9.1 |
Read Review |
 |
Hommoat 2 Button 5 Pin Hand Remote Control for…
|
9.0 |
Read Review |
 |
Fruhdi 4 Button 5 Pin Prong Hand Control Handset…
|
8.8 |
Read Review |
 |
Kariwust 2 Button 5 Pin Remote ZK1200-HC Hand Control…
|
8.6 |
Read Review |
 |
hmleaf Two Button, 5 pin, Lift Chair or Power…
|
8.4 |
Read Review |
 |
Lift Chair Remote Replacement, 4-Button Dual Motor Remote for…
|
8.2 |
Read Review |
Quick Review For Top 10 Lift Chair Controller
Fresayerd Lift Chair Remote Replacement, 5 Pin 2 Lighted Button Hand Control with 6Ft Cord for Power Lift Recliner Chairs Accessories, Recliner Control Replacement Parts
The Fresayerd Lift Chair Remote Replacement is a 5 pin 2 lighted button hand control with a 6ft cord designed for power lift recliner chairs. If your old remote is broken, worn out, or just not working right, this part can get your chair back in action.
This remote is built for wide compatibility. It uses a standard 5 pin circular plug, so it works with most lift chairs, medical recliners, and home theater seating that use a 5 pin connector.
You don’t have to worry about complex matching — it’s made to fit common brands.
The control has two lighted buttons for up and down movement. The buttons feature a soft blue backlight, which is great for low light conditions. This design is especially helpful for elderly users or anyone with limited mobility, because you can clearly see the buttons and press them without fumbling. The layout is simple and direct: one button lifts you up, the other brings you down.
Nothing confusing about it.
Durability is a key point here. The remote is made from premium ABS plastic, which resists drops, scratches, and everyday wear. It feels solid in your hand and is built to last through regular use. You wont have to replace it again anytime soon.
Installation is plug and play. No tools needed. The remote comes with an extended 6 foot cable, so you have plenty of reach to connect it to your chair’s motor.
Fromann Recliner Remote Hand Control 2 Button 5 pin for Electric Power Lift Sofa Chair
The Fromann Recliner Remote Hand Control 2 Button 5 pin for Electric Power Lift Sofa Chair is a straightforward replacement part designed for single-motor power recliners and lift chairs. It gives you simple control over two basic functions: raising and lowering the footrest, and lifting the chair to help you stand up.
This hand control uses a 2-button design with a 5-pin connection that plugs directly into your chair’s motor.
It is made to work with a single motor system, so if your chair has more than one motor, this unit won’t be compatible. The buttons are clearly labeled for up and down movement, making it easy to operate without any confusion.
One of the key features is its wide compatibility. While it is a Fromann product, it works with many different brands of power recliners and lift chairs.
So if you have a chair from another manufacturer and the original remote has failed, this could be a suitable replacement. Just check that your chair uses a 5-pin motor connection before ordering.
The remote features a straight connector with a 90-degree angle plug at the end. This angled design helps the cable fit neatly against the chair frame or motor, reducing strain on the connection point.
Fruhdi Lift Chairs Power Recliners 2 Button 5 Pin Prong Remote Handset Controller Hand Control with USB and Backlight
The Fruhdi Lift Chairs Power Recliners 2 Button 5 Pin Prong Remote Handset Controller Hand Control with USB and Backlight is a replacement remote designed for electric lift chairs and power recliners. It is built to be simple and functional, so you can operate your chair without any confusion.
This remote has a long black housing with two large black buttons. The buttons are easy to press, even if your hands are not as strong as they used to be.
One button moves the chair up, and the other moves it down. That is all there is to it. The remote also includes a USB port and a backlight. The backlight helps you see the buttons in a dark room, which is a nice touch. The USB port lets you charge a phone or tablet while you sit, so you do not need to reach for a wall outlet.
The remote works with several brands of chair motors, including Okin, Limoss, Kaidi, Mulin, and FBS.
It also fits many other brands that use the standard 5 pin round plug. If your old hand control was a model like ELEASMB7337 or MLSK111-A1, this remote should work as a replacement. Just check that your chair uses the same 5 pin prong conection before you order.
The cable is 6.2 feet long, which gives you a good range of motion. It has a 180 degree angle plug at the end, and the package includes an extension cable.
CUGLB Lift Chair Remote Replacement, 5 Pin 2 Buttons Straight Power Recliner Remote, Power Recliner Replacement Compatible for Most Lift Chair Brands
The CUGLB Lift Chair Remote Replacement is a 5 pin, 2 button straight power recliner remote designed to be a simple swap for your old or broken hand control. If your lift chair has a round 5 pin connector and uses a straight plug, this remote is likely a good fit. It focuses on the basics: up and down movement. No complicated menus or extra features to get in the way.
This remote is built to be universal and durable.
It works with a wide range of brands, including Okin, Tranquil Ease, Limoss, Golden, Pride, Med, Med-Lift, Berkline, Serta, Mcombo, KD, and Bride lift chairs. It also works with power recline systems using DeltaDrive and BetaDrive motors. The construction is solid, so it should hold up to daily use. You wont have to worry about it breaking after a few months.
Using it is pretty easy. Its a simple upward and downward hand control.
It works with chairs that have a quick disconnect on the cord, and also with chairs that dont. That gives you a lot of flexibility. The buttons are large and require minimal force to press. You can operate it with either your right or left hand without any trouble.
The design focuses on convenience. The remote measures 6.6 by 1.9 inches, so it fits nicely in your hand.
AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride VivaLift Lift Chair (Standard & Early Version Viva Lift 2) – (CTL1707190) for Standard & Early Version VivaLift 2 Models
The AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride VivaLift Lift Chair (Standard & Early Version Viva Lift 2) – (CTL1707190) is a direct replacement part made by Pride Mobility. This remote is designed specificaly for standard models of Pride VivaLift chairs, including the Atlas, Elegance, Escape, Legacy, Metro, Tranquil, and Urbana. It also works with some early version VivaLift 2 chairs.
You need to be careful about compatibility.
Standard and early version 2 chairs use a 10-button controller. Later version 2 chairs use a 12-button controller. Thes two are not interchangeable. This remote will not work with Ultra, Radiant, or later VivaLift 2 models. Check the product images to make sure this is the right wand for your chair. The part number is CTL1707190.
This hand control gives you full command over your lift chair. It has ten buttons that adjust the headrest, lumbar support, back position, and leg rest.
You also get up and down lift control. Everything is managed from one simple pendant. It is a quick and easy replacement. The recliner pendant uses a 5-pin connector for plug-n-play installation. Just unplug the old one and plug this one in. It also has a USB port so you can charge your phone or other device while you relax.
One important thing to keep in mind. If installing this new hand controller does not fix the issue, a different part of the chair may need repair or replacement.
Hommoat 2 Button 5 Pin Hand Remote Control for Power Lift Chair & Power Recliner, Replacement Remote Handset with 2 Lighted Buttons CD001 (Black)
The Hommoat 2 Button 5 Pin Hand Remote Control for Power Lift Chair & Power Recliner, Replacement Remote Handset with 2 Lighted Buttons CD001 (Black) is designed to get your chair moving again without any fuss. It’s a simple replacement remote that focuses on doing the basics right. If your old remote is broken, lost, or just not working, this is a straight swap that will have you relaxing in no time.
First off, you need to check if this will work with your chair.
The remote uses a 5-pin plug. If your power lift chair or recliner’s actuator has the same 5-pin connection, then you are good to go. It meets CE, ROHS, FCC, and UL requirements, so it should be a safe and reliable replacement for your old handset. No need to worry about complicated setup—just plug it in and you’re set.
One of the best things about this remote is the lighted buttons. The two buttons are made from rubber, which feels nice and comfortable under your finger.
But the real star is the built-in green lights. When the room is dark, those lights glow so you can find the controller quickly. No more fumbling around in the dark trying to rememeber which button does what. You can easily see which one to press.
Another handy feature is the cable. It’s a coiled cord that stretches from 59 to 67 inches. That gives you plenty of reach, no matter how you are sitting. You can hold the remote in your lap, on the armrest, or even pass it to someone nearby.
Fruhdi 4 Button 5 Pin Prong Hand Control Handset Remote with USB and Backlight for Lift Chairs Electric Sofa Power Recliners
The Fruhdi 4 Button 5 Pin Prong Hand Control Handset Remote with USB and Backlight for Lift Chairs Electric Sofa Power Recliners is a replacement remote designed to work with a variety of power lift chairs and recliners. It comes in a long black housing with four large, easy-to-press buttons. The buttons are backlit, making it simpler to use in a dark room.
This remote also includes a USB port, so you can charge your phone or tablet without needing to reach for a wall outlet.
This hand control is compatible with motors from brands like Okin, Limoss, Kaidi, Mulin, FBS, and others. However, there are a couple of things to check. In some cases, the control buttons might be reversed from what the button says, or the buttons may stop working entirely.
This has been reported with specific models like the Ashley Yandel Lift Chair remote (model HSW304C-B-KBA) and the Motomotion Senior Chair. So it is a good idea to test compatability before you commit.
You need to make sure you have the exact same connector. This remote uses a 5 pin round male plug with a straight plug connector. It is not compatible with motors that have a 5 pin connector with lips or a plastic housing around the prongs.
Kariwust 2 Button 5 Pin Remote ZK1200-HC Hand Control Replacement for Golden with USB and Backlight for Lift Chair Power Recliner
The Kariwust 2 Button 5 Pin Remote ZK1200-HC Hand Control Replacement for Golden with USB and Backlight is a practical switch for your lift chair power recliner. This is a direct replacement for the up and down function of your chair. If your current remote is worn out or broken, this controler gets your chair moving again. It specifically replaces the Golden Technologies Model ZK1200-HC, and it works with many different brands of lift chairs.
You can use it with RMT, Dewirt, Limoss, and Kaidi motors, which are common in these chairs. So if you have a lift chair from Golden or another brand using those motors, this should fit just fine. This remote is built with a USB port and a backlight feature. The USB port lets you charge your phone or tablet while you are sitting in the chair. That is a nice bonus for convenience. The backlight is helpful in a dark room. You can see the two buttons clearly without fumbling around for a lamp.
It makes using the chair at night much easier. The cable is between 40.5 and 62.2 inches long. That is plenty of length to let you control the lift chair from different positions. You can reach the remote from the side or from a short distance away. At the end of the cable, there is a 180 degree angle plug. This plug connects directly to the motor of your chair. It is designd to lock in securely, so you don’t have to worry about it pulling out during use. Installation is simple.
hmleaf Two Button, 5 pin, Lift Chair or Power Recliner Hand Control
The hmleaf Two Button, 5 pin, Lift Chair or Power Recliner Hand Control is a straight forward replacement remote designed for power lift chairs and recliners. It focuses on being a universal fit, especially if your chair uses a round 5 pin connector with a 180 degree plug. This remote is made to work with a wide range of motor brands, including Okin, Tranquil Ease, Limoss, Golden, Pride, Med, Med-Lift, Berkline, Serta, Mcombo, KD, and Bride Lift Chairs.
It also supports DeltaDrive and BetaDrive motors. So if you have a chair from one of these brands, this control is likely a good match.
The remote is simple to use. It has just two buttons – one for up and one for down. There is no complicated menu or extra features to figure out. You press the top button to lift or recline, and the bottom button to lower or return the chair. The size is 6.6 x 1.9 inches, which fits nicely in your hand.
The cord length is between 59 and 68 inches, giving you enough reach to keep the remote on a side table or chair arm. The cord also features a 90 degree angle plug. This is helpful because it lets you adjust the plug direction to save space behind the chair or near the wall. It makes set up a little cleaner and easier to manage.
Durability is a key point here. The remote is made with good quality materials, so it feels solid and should hold up to daily use.
Lift Chair Remote Replacement, 4-Button Dual Motor Remote for Lift Chair & Recliner Replacement Parts, LED Backlight, USB Charging Port & Type-C Adapter, Recliner Hand Control, Universal 5-Pin Plug
The Lifesmart 4-Button Dual Motor Remote Replacement is a handy solution for anyone needing a new control for their lift chair or recliner. It is built to work as a direct replacement for most dual-motor recliners out there. The remote uses a standard 5-pin round plug, which makes installation pretty straightforward—just plug it in and you should be good to go. But, you should always check your chair’s plug type first to make sure it matches before you buy.
This remote is designed to be compatible with motors from brands like Okin, Limoss, Kaidi, Mulin, and FBS. That said, it is not perfect for every model. On some chairs, like the Ashley Yandel lift chair remote (Model HSW304C-B-KBA) or Motomotion lift chairs, the button functions might be opposite to what is labeled, unresponsive, or reversed. If that happens, it is normal for some models not to work.
The company offers after-sales support, and you can apply for a return and get a refund if it does not fit your chair. The controls are simple and user-friendly. You get four large, ergonomic buttons that let you control the backrest and footrest seperately. The design uses a “press and hold to move, release to stop” mechanism. This gives you precise control over your position, so you can find the perfect angle easily. It is safe and simple for anyone to use.
Lift Chair Controller Buying Guide
Selecting teh right lift chair controller ensures smooth, reliable operation for daily use. It’s the brain of your chair, the part you touch every single time you stand up or sit down. A bad controller can turn a helpful chair into a frustrating one. But how do you know which one works best for your needs? Let’s break it down by the things that actually matter.
Compatibility with Your Chair Model
Not every controller works with every chair. You need one that matches your specific motor and wiring system. Check your chair’s brand and model number first. Look at the connector pins and the voltage rating. If you plug in the wrong one, nothing happens or worse, it could damage the motor. Always verify compatibility before buying.
Button Layout and Grip Comfort
Think about how your hand fits around the controller. Some have large, raised buttons that are easy to press with weak hands. Others have a slim, paddle-style design that rests in your palm. Ask yourself: can you feel the buttons without looking? Is the cord long enough to reach your lap? A controller that slips or feels awkward leads to fumbling and frustration.
Wired vs. Wireless Options
Most controllers are wired, which means a cord runs from the handset to the chair base. Simple and reliable. But cords can get tangled or pinched. Wireless controllers exist too, offering more freedom. However, they need batteries and can have signal issues. For most people, a wired controller is the safer bet. It just works.
Durability and Build Quality
You will use this controller many times a day for years. It needs to hold up. Look for thick plastic casing and sealed seams that resist dust and spills. Avoid flimsy models that flex when you squeeze them. A quality controller feels solid and has a bit of weight to it. Cheap ones crack or stop responding over time.
Replacement vs. Upgrade Options
Are you replacing a broken part or upgrading an old chair? A direct replacement is easy and safe. But you might find a controller with extra features, like a backup battery or a USB charging port. Just make sure it’s compatible. Upgrading can add convienence, but it’s not always plug-and-play. Read reviews to see what other owners did.
Frequently Asked Questions About Lift Chair Controller
How do I know if a replacement lift chair controller is compatible with my chair?
Check your current controller’s model number and brand. Most controllers have a label on the back or cord. Match this to the product listing. If you are unsure, measure the plug type and count the pins. You can also take a photo of your old controller and send it to the seller. It’s always better to double-check than to guess.
Can I use a universal controller for any lift chair?
Sometimes, but not always. Universal controllers work with many popular brands like Pride and Golden Technologies. But thay might not fit older or less common models. Look for a controller that lists your chair’s brand and model. If it says “universal,” read the fine print to see which chairs it supports.
What should I do if my lift chair controller stops working?
First, check the power cord and battery connections. Make sure the chair is plugged in. Then look for loose wires on the controller. If the lights on the controller are dim or off, the battery might be dead. Try a simple reset—unplug the chair for 30 seconds and plug it back in. If none of these work, you probably need a new controller.
Are all lift chair controllers the same size and shape?
No, they vary a lot. Some are small and handheld. Others are large with more buttons. The shape and button layout differ by brand. Always measure the mounting bracket or hole on your chair armrest. A controller that is too big or too small won’t fit properly.
How do I install a new lift chair controller?
It’s usually simple. Unplug the old controller from the chair’s motor. Plug the new one in the same spot. Most controllers have a plug-and-play design. No special tools are needed. Just make sure the chair is off before you start. After installing, test all functions slowly.
What does the warranty cover for lift chair controllers?
Warranties vary by brand. Most cover defects in materials or workmanship for one to two years. They don’t cover damage from misuse or normal wear and tear. Always read the warranty card that comes with your controller. Keep your receipt in case you need to file a claim.
In Summary
Choosing the right lift chair controller is simpler than you might think. Focus on what really matters for your daily comfort. Look for a model that fits your chair’s wiring and has the buttons you need. You want something you can use without struggle—even in low light or when you’re tired. A good controller makes getting up and sitting down feel effortless. You’ll wonder why you didn’t upgrade sooner.
Remember, a quality lift chair controller can make a huge difference in your everyday routine. It gives you back your independence. You get to relax knowing you can always stand up when ready. So take your time, check the specifications, and pick the one that feels right for you. Your comfort is worth the small effort. Find your perfect lift chair controller for smooth, reliable operation every time.