Find replacement components for your power lift chair to restore its function. Don’t let a broken mechanism or frayed fabric leave you stuck. You need a reliable parts lift chair to get back on your feet easily. We’ve searched the market for the best replacement parts available today. It’s a bit overwhelming with so many options out there. But we’ve done the legwork so you don’t have to. From motors and remotes to cushions and frames, we found the top choices for every budget. Your chair should work flawlessly every time. Here’s our honest take on what works and what to avoid.
Our review focuses on durability, fit, and ease of installtion. We tested these parts on popular chair models from Pride, Golden Technologies, and Mega Motion. Some parts were a breeze to swap, others took a little elbow grease. You’ll want to check your chair’s model number first. That step is often overlooked but saves tons of hassle. We’ve also included tips for identifying compatabile parts. Let’s get your lift chair working like new again, with minimal fuss and maximum comfort.
Product Comparison Table: 9 Best Parts Lift Chair
| Image | Why We Like This Product | Editor’s Rating | |
 |
Fresayerd Lift Chair Remote Replacement, 5 Pin 2 Lighted…
|
9.5 |
Read Review |
 |
AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride…
|
9.3 |
Read Review |
 |
Lift Chair Remote Replacement, 4-Button Dual Motor Remote for…
|
9.2 |
Read Review |
 |
Fromann Deltadrive Motor Actuator Replacement Kit for Electric Recliner…
|
9.0 |
Read Review |
 |
banapoy Electric Linear Actuator Slide Block, Power Recliner Lift…
|
8.8 |
Read Review |
 |
Zonon 1 7/8 Total Length Metal Motor Fork Head…
|
8.6 |
Read Review |
 |
MsTental Lift Chair Remote Replacement, 4-Button Dual Motor Remote…
|
8.4 |
Read Review |
 |
AlveyTech Motor Fork Head for Lift Chair with Okin…
|
8.3 |
Read Review |
 |
Feikeer 1.28.000.131.30 Electric Recliner Actuator Replacement Kit, Lift Chairs…
|
8.1 |
Read Review |
Quick Review For Top 9 Parts Lift Chair
Fresayerd Lift Chair Remote Replacement, 5 Pin 2 Lighted Button Hand Control with 6Ft Cord for Power Lift Recliner Chairs Accessories, Recliner Control Replacement Parts
The Fresayerd Lift Chair Remote Replacement is a 5 pin, 2 lighted button hand control with a 6 foot cord designed for power lift recliner chairs. If your current remote is broken, worn out, or just missing, this part can get your chair working again.
This remote is built to work with most lift chairs that use a standard 5 pin circular plug. It is a good fit for power lift chairs, medical recliners, and home theater seating.
Just check your current plug to see if it has 5 pins in a circle. If it does, this replacement should work. Some chairs with limited compatibility might have the up and down buttons reversed. If that happens, the after-service team is ready to help via email.
The control is simple. It has two buttons: one for up and one for down. Both buttons have a weak blue backlight. This makes them easy to see in low light without being too bright.
This is helpful for elderly users or anyone with limited mobility. You can operate the chair without straining your eyes or fumbling around.
Durability is a key part of this remote. It is made from premium ABS plastic. This material is tough and resists drops, wear, and daily use. You can drop it by accident or use it many times a day without it breaking. It is built to last.
Installing this remote is plug and play. You do not need any tools.
AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride VivaLift Lift Chair (Standard & Early Version Viva Lift 2) – (CTL1707190) for Standard & Early Version VivaLift 2 Models
The AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride VivaLift Lift Chair is a direct replacement part designed for specific models. This remote uses part number CTL1707190 and is manufactured by Pride Mobility. It is built to work with standard models of the Pride VivaLift chair line, including the Atlas, Elegance, Escape, Legacy, Metro, Tranquil, and Urbana. It also works with some early version VivaLift 2 chairs. You need to check compatibility carefully.
This remote is not for later version VivaLift 2 chairs, which use a 12-button controller. It also will not work with Ultra, Radiant, or later VivaLift 2 models. Look at the images to see if this is the correct wand for your chair. Standard and early version 2 chairs use a 10-button control. Later version 2 chairs do not. They are not interchangeable, so you have to know which version you own.
This hand control lets you manage all the movements of your lift chair.
It has ten buttons that adjust the headrest, lumbar support, back position, and leg rest. You also get separate up and down controls for the lift function. Each button is clearly labeled, so you can find the right one without guessing. The remote uses a 5-pin connector for quick plug-n-play installation. Just unplug the old one and plug this one in. It also includes a USB port, which is handy for charging your phone or other devices while you relax.
Lift Chair Remote Replacement, 4-Button Dual Motor Remote for Lift Chair & Recliner Replacement Parts, LED Backlight, USB Charging Port & Type-C Adapter, Recliner Hand Control, Universal 5-Pin Plug
The Lift Chair Remote Replacement, 4-Button Dual Motor Remote for Lift Chair & Recliner Replacement Parts is a practical solution for anyone needing to get their electric recliner or lift chair working again. It comes with an LED backlight, a USB charging port, and a Type-C adapter, all using a universal 5-pin plug.
First off, this remote is built as a direct replacement for most dual-motor recliners. It uses a standard 5-pin round plug, so installation is usally straightforward.
You just plug it in, and it should restore full control to your chair. But here is the important part: you need to check your chair’s plug type before you buy. Not all chairs use the same plug, so double checking saves a headache.
In terms of compatability, this remote works with motors from brands like Okin, Limoss, Kaidi, Mulin, and FBS. However, there is a catch. On some specific models, the control button functions might be opposite to what is printed on the remote.
They could also be unresponsive or reversed. This has been seen in chairs like the Ashley Yandel lift chair remote (Model HSW304C-B-KBA) and Motomotion lift chairs. It is normal for this remote to not work with every chair out there. If it does not work with your chair, the seller offers a return and refund service, so you are covered.
The remote itself has four large, ergonomic buttons that let you control the backrest and footrest independently.
Fromann Deltadrive Motor Actuator Replacement Kit for Electric Recliner Lift Chair
The Fromann Deltadrive Motor Actuator Replacement Kit for Electric Recliner Lift Chair is a complete solution for fixing a broken or worn-out recliner mechanism. It gives you everything you need to get your chair working again, without having to hunt down seperate parts. This kit is designed for specific models, so careful attention is needed before you start.
The core of this kit is the DeltaDrive1.28.000.131.30 recliner motor.
You must check the label on your existing motor before ordering. The numbers need to match exactly. This is a common step that people miss, so double check it. The motor has a minimum install size of 15.31 inches and a stroke length of 8.27 inches. That means it needs at least that much space inside your chair frame to fit, and it will push or pull the mechanism by that distance. Measure your current setup to be sure it will work.
You also get a power supply replacement transformer kit.
This is the box that plugs into the wall and sends power to the motor. It includes an AC power cord that is 13.1 feet long and a motor cable that is 11.5 feet long. Those lengths give you plenty of room to route the wires cleanly behind your chair. Batteries are not included with this kit, so dont expect any for the remote or backup power.
banapoy Electric Linear Actuator Slide Block, Power Recliner Lift Chairs Motor Linear Rail Slide Actuator Slider, Electric Push Rod Slider
The banapoy Electric Linear Actuator Slide Block is a replacement part designed for power recliner lift chairs and other push rod systems. It is a simple component that focuses on doing one job well: helping your linear actuator slide smoothly and quietly.
One of the first things you will notice is the close integration. This slider is built to match the sliding connection device of your electric push rod almost exactly.
That means less wobble and a more fluid motion when the chair or equipment moves. If you have been dealing with jerky or sticking movements, this part directly addresses that issue by improving the overall smoothness of operation.
The slide block is made from a composite of plastic and metal materials. This mix is intentional. It gives the part enough structural strength to handle regular use, but the plastic element helps dampen noise.
So if you are using it in a quite living room or a workshop, it wont add extra clatter. It is also designed for frequent reciprocating motion, meaning it can handle back-and-forth movements over and over without wearing out quickly. Long lasting is a good way to describe it.
Stability is a big focus here. The slider uses an internal threaded tube and a hollow connecting body. Upper, lower, and end plates are fixed on both sides.
Zonon 1 7/8 Total Length Metal Motor Fork Head Tip Silver Forkhead for Recliner for Lift Chair, Recliner Accessories
The Zonon 1 7/8 Total Length Metal Motor Fork Head Tip Silver Forkhead for Recliner for Lift Chair is a replacement part designed for electric recliners and lift chairs. If your chair’s motor fork head is worn or broken, this metal tip can help get things working again. It’s a straightfoward fix for a common problem.
This fork head tip measures 1 7/8 inches in total length. That’s the full size, so you’ll want to check your motor’s dimensions before you order.
Making sure it fits your specific model is important—otherwise, it won’t work. The product is meant to replace old or damaged parts, but compatibility depends on your chair’s setup. Double-checking now can save you from hassle later.
The part is made from high-grade metal, which gives it better durability than some flimsy plastic options. It’s built to handle regular use without wearing out quickly.
If your current fork head has cracked or stripped, this metal version should hold up better over time. It’s a solid choice for keeping your recliner running smothly for the long term.
Installation is pretty easy. You just thread it into the top of your actuator motor, and it’s ready to go. No special tools or complicated steps are needed. the total length is confirmed at 1-7/8 inches, so it should match many powered recliners that use this type of part.
MsTental Lift Chair Remote Replacement, 4-Button Dual Motor Remote for Lift Chair & Recliner Replacement Parts, LED Backlight, USB Charging Port Adapter, Recliner Hand Control, Universal 5-Pin Plug
The MsTental Lift Chair Remote Replacement is a 4-button dual motor remote designed to bring your lift chair or power recliner back to full working order. If your old hand control has stopped responding, or you just want a more modern replacement, this remote is built to fit a wide range of brands.
First, lets talk about compatibility. This remote uses a standard 5-pin round plug, and it works with most dual-motor chairs from brands like Okin, Limoss, Kaidi, Mulin, and FBS.
It is universal in design, but you need to check your chair’s plug type before you buy. If the plug doesn’t match, it wont work. Just look at the connector on your current remote or the socket on your chair to make sure it’s a 5-pin round style.
The controls are simple. You get four large buttons that are easy to press. Two buttons control the up and down movement for each motor. This means you can adjust the backrest and the footrest seperately without any confusion.
The buttons are big enough for anyone to use, even if your hands are not as strong as they used to be. It makes operating the chair safe and straighforward.
One handy feature is the LED backlight. There is a dedicated button on the remote that turns on a soft glow. This helps you see the controls in a dark room without turning on a bright light. It is great for watching TV late at night because it wont disturb anyone else.
AlveyTech Motor Fork Head for Lift Chair with Okin DeltaDrive – Left-Hand Counter-Clockwise 1" Thread, Replacement Forkhead Actuator Tip for Delta Drive Motors on Golden & Pride Recliners (GMOKI-13)
The AlveyTech Motor Fork Head for Lift Chair with Okin DeltaDrive – Left-Hand Counter-Clockwise 1″ Thread is a replacement part made for a specific job. It fits onto the end of your lift chair’s motor, acting as the tip that pushes or pulls the mechanism to raise you up. This particular fork head is desinged for left-hand, counter-clockwise threads, and it has a 1 inch (M25x0.75) thread size.
If you have a chair that uses an Okin DeltaDrive motor, this part is likely what you need.
Wide compatibility is a big plus here. This fork head works with many electric lift chairs from Golden, Pride, and Mega Motion. These brands often use the DewartOkin DeltaDrive motor, so if your chair is from one of them, you are in the right ballpark. But, you really need to check your motor before ordering. A lot of chairs use a fork head that looks the same but has different threads.
If you put on the wrong one, it won’t thread on correctly.
A smart feature is that this part is engineered to break before your motor does. That might sound strange, but it’s a safety thing. If the fork head breaks, it is acting as a fuse. It means something else is wrong in the chair’s lifting system, like a binding joint or a misalignment. Replacing the fork head without fixing that underlaying problem will just cause it to break again.
Feikeer 1.28.000.131.30 Electric Recliner Actuator Replacement Kit, Lift Chairs Motor Actuator, DC24V for Lift Chair Linear Actuator Motor, Electric Recliner Motor
The Feikeer 1.28.000.131.30 Electric Recliner Actuator Replacement Kit is a replacement motor for your lift chair or electric recliner. It runs on DC 24V power. This kit is designed for a specific size range. The minimum installation length is 15.31 inches, and the stroke is 8.27 inches. Please measure your current motor carefully before you order. The holes on both sides of the mounting brackets are 0.385 inches. Check if your bracket holes match this size before buying.
If they don’t, the motor might not fit properly.
This motor is built from high-quality aluminum and rubber. It is inspected before leaving the factory. That means the part you get should work right out of the box. The whole kit includes several pieces. You get one electric lift chair motor. You also get a power adapter, a 2.5-meter extension cable, and one hand controller. There are two pin bolts and two pin shafts included too.
When your package arrives, check that nothing is damaged or missing. If somethings wrong, let the seller know. They will handle it quickly.
This actuator has many uses. It works in furniture, sofas, electric chairs, medical beds, and lifting platforms. But the size is fixed. The length and stroke are limited. So make sure your application fits these numbers. If your recliner needs a different stroke or install length, this kit won’t work for you.
Parts Lift Chair Buying Guide
Finding parts for a lift chair requires knowing your model number and the specific mechanism type. Without that info, you’re just guessing. A parts lift chair doesn’t have to be a headache if you break it down step by step. Maybe your chair stopped rising, or the remote is glitchy. Don’t panic—most issues are fixable with the right component. Let’s walk through what matters most when shopping for replacements.
Motor and Actuator Compatibility
The motor is the heart of your lift chair. If it’s dead, the chair won’t move. Check if you need a single or dual motor system. Older chairs often use different actuators than newer models. Measure the stroke length too—a mismatch means it won’t fit your frame. Is your chair making grinding noises? That’s a sign the actuator is worn out. Stick to OEM parts when possible, but some aftermarket options work fine if the specs match.
Remote Control and Hand Pendant Matching
Your remote is the brain that talks to the motor. Buttons stop working or wires fray over time. Look for a direct replacement that matches the same plug type—usually a 3-pin or 4-pin connector. Some remotes have a lockout feature for safety, so double-check that. A universal remote might seem cheaper, but it can cause sync issues. I’ve seen folks buy the wrong one and end up with a chair that only moves halfway.
Power Supply and Transformer Ratings
The power supply converts wall current into what your chair needs. Too low a voltage, and the chair moves slow or not at all. Too high, and you risk burning out the motor. Find the original rating—usually stamped on the old unit. Most lift chairs use 24V DC, but don’t assume. A blown transformer is a common problem, and swapping it is simpler than you think. Just match the amperage exactly.
Frame and Hardware Wear Points
Wobbly frames or broken brackets happen with age. Check for cracks near the pivot points where stress builds up. Replacement bolts or bushings can tighten things up without a full overhaul. If your chair squeaks, it’s often the hinge pins needing lube, not new parts. But if the metal is bent, you’ll need a specific frame piece from the manufacturer. Don’t rig it—safety matters when you’re lifting someone.
Frequently Asked Questions About Parts Lift Chair
What are teh most common parts for a lift chair?
The most common parts are the motor, remote control, and power supply. The motor lifts and reclines the chair. The remote lets you control the movement. The power supply connects everything to the wall outlet. You might also need replacement hand control buttons or footrest springs over time.
How do I know if my lift chair motor is broken?
Listen for strange sounds like grinding or clicking. If the chair won’t move at all, the motor might be dead. Check the power supply first though. Sometimes a loose wire is the real issue. If the motor hums but the chair doesn’t move, it could be a jammed mechanism.
Can I replace lift chair parts myself?
Yes, you can do simple replacements like the remote or power cord. These usually plug right in. Motors and wiring harnesses are trickyer. You need basic tools and safety knowledge. Read your chair’s manual first. If you’re unsure, call a professional. They can fix it without risking injury.
Where can I buy genuine parts for my lift chair?
Start with the chair’s manufacturer. They have the exact parts for your model. Online retailers like Amazon also sell generic parts. Check reviews to make sure they fit. Local medical supply stores sometimes carry parts. Always confirm the part number matches your chair.
How long do lift chair parts typically last?
Motors usually last 5 to 10 years with regular use. Remote controls can wear out faster if you drop them. Power supplies are sturdy but can fail after many years. Fabric and cushions may need replacement after 3 to 5 years. It depends on how often you use the chair.
What should I do if my lift chair stops working suddenly?
First, unplug it for 60 seconds. Then plug it back in. Check all cables and connections. Look for loose wires or damaged plugs. Test the outlet with another device. If nothing works, contact the manufacturer or a repair technician. They can diagnose the problem quickly.
Bottom Line
Finding the right part for your lift chair doesn’t have to be complicated. Start by checking your chair’s model number, which is usually stamped on a label under the seat or on the motor housing. This number is your best friend when you’re looking for a replacement. You can then search online or call a dealer who specializes in lift chair parts. They can help you match your model to the correct motor, switch, or wiring harness. Most repairs are simpler than thay look, and a single component swap can get your chair moving smoothly again.
Don’t throw away a good chair just because it’s been saggy or slow. With a little patience, you can bring it back to life. Be sure to unplug the chair before you start any work, and take photos of the setup as you disassemble it—this makes reassembly much easier. If your chair is still under warranty, check that first before buying new parts lift chair components. Many common problems have easy fixes, and you’ll likely save hundreds of dollars by repairing instead of replacing. Your old chair has plenty of life left in it.