Transport your chair easily with power chair carriers for cars. You know the struggle of lifting that heavy chair into your trunk. It’s a real back-breaker! These carriers do the heavy lifting for you. Just press a button and watch the magic happen. Your power chair gets loaded safely without any strain on you. They attach right to your hitch or trunk.
Now you can hit the road without sweating. No more asking strangers for help in parking lots. You’re independent and ready to roll. These devices are built tough but won’t break your bank. They work with most chair sizes too. Realy, it’s a game changer for your daily trips. Whether it’s a quick store run or a long vacation, you’ve got this covered. Your freedom just got a whole lot easier.
Product Comparison Table: 7 Best Power Chair Carriers For Cars
| Image | Why We Like This Product | Editor’s Rating | |
 |
Wheelchair Scooter Carrier with Ramp for Car Truck SUV,…
|
9.8 |
Read Review |
 |
Rockland Electric Wheelchair/Scooter Carrier with Automatic Lift, 350 LBS…
|
9.5 |
Read Review |
 |
Silver Spring Universal Electric Power Chair and Scooter Lift…
|
9.2 |
Read Review |
 |
Rockland Foldable Electric Mobility Scooter Carrier, 350 lb Capacity,…
|
8.9 |
Read Review |
 |
Mobility Carrier Wheelchair Scooter Rack Disability Medical Ramp Hitch…
|
8.5 |
Read Review |
 |
Aluminum Wheelchair Carrier for Car, 500 lb Capacity, Tilt-A-Rack…
|
8.2 |
Read Review |
 |
Harmar Mobility Upgraded AL500 Power Wheelchair Lift Outside Fully…
|
7.9 |
Read Review |
Quick Review For Top 7 Power Chair Carriers For Cars
Wheelchair Scooter Carrier with Ramp for Car Truck SUV, 2" Hitch, 500 lb. Capacity, 48" x 28" Cargo Carrier for Vehicles, Silver Spring
The Silver Spring Wheelchair Scooter Carrier with Ramp for Car Truck SUV is built to make transporting heavy mobility gear a lot simpler. It fits any standard 2 inch trailer hitch receiver, so it works with Class III or IV hitches on cars, trucks, or SUVs. The whole unit weighs only 56 pounds, but it can hold up to 500 pounds. That means it can carry most powered wheelchairs or scooters without any trouble.
The carrier is made from a mix of durable aluminum and powder-coated steel.
This keeps it strong while resisting rust and wear. The inner basket measures 48 inches long by 27.75 inches wide, and the outer basket is 48 inches by 28 inches. The overall width, including the hitch post, is 38.25 inches. The built-in loading ramp is 45.625 inches long and 27.75 inches wide, so it gives you plenty of room to roll your device up.
Loading and unloading is straightforward. You just release the pin holding the lightweight ramp and set it down on a level surface.
The ramp has 3 inch wide rungs that give you good grip, and they also help keep dirt and debris from building up. Once your scooter or chair is on the carrier, you lift the ramp back up and secure it in its upright position. There is an anti-rattle device built into the hitch mount that stops wobble and tilt while you drive. That makes the ride a lot more stable and less noisy.
You also get 4 aluminum ring tie down points on the side rails.
Rockland Electric Wheelchair/Scooter Carrier with Automatic Lift, 350 LBS Capacity, Foldable Design, Manual Crank for 2" Hitch Receiver, Heavy-Duty Mobility Lift for Easy Transport
The Rockland Electric Wheelchair/Scooter Carrier with Automatic Lift is built to help you transport a mobility device without the heavy lifting or hassle. This carrier uses a powerful electric jack to raise and lower your scooter or wheelchair, so you don’t have to strain yourself. It supports up to 350 pounds, which covers most standard scooters and power chairs. The platform measures 38 inches long and 27.5 inches wide, and the cradle can extend out to 46 inches for larger devices.
This makes it a good fit for vehicles with a Class II hitch or higher.
Securing your scooter is simple thanks to four self-tensioning retractors built right into the carrier. You won’t need extra tie-down straps or bungee cords. Just position your device, hook the retractors, and they tighten automatically. Loading takes about 20 seconds with the one-key remote control, and folding the carrier up takes only 6 seconds.
That means less time messing around and more time on the road.
If your battery dies or you have a power issue, theres a manual crank included. This lets you raise or lower the carrier by hand, so you are never stranded. It’s a simple backup that gives you peace of mind. Installation is straightforward and requires no drilling. The kit comes with a wiring harness, license plate holder, and a warning LED light to keep you legal and visible.
Silver Spring Universal Electric Power Chair and Scooter Lift and Carrier
The Silver Spring Universal Electric Power Chair and Scooter Lift and Carrier is built to get your mobility device from point A to point B without the fuss. It is made from high-strength, lightweight aluminum, so it holds up well without adding a ton of weight to your vehicle. You can use it with either a Class III or IV 2-inch hitch receiver, and it comes with a Class II 1-1/4-inch adapter for smaller hitches.
That gives you some flexability depending on what your car or truck has.
The platform is 39 inches long and 27 inches wide, with an adjustable cradle that extends out to 46 inches. So if your scooter or power chair is a bit longer, you have room to work with. The inner dimensions of the platform are 39 to 46 inches long and 26.5 inches wide. That should fit most standard models.
It can handle up to 350 pounds, which covers the weight of most chairs and scooters on the market.
You get four self-tensioning retractors to keep your device secure during transit. No need to mess with loose straps. It also includes a license plate holder so you don’t block your plate, and a wiring harness to connect the lights. If the electric lift ever fails, there is a built-in manual back-up hand crank. That means you wont be stranded if the power goes out.
Rockland Foldable Electric Mobility Scooter Carrier, 350 lb Capacity, Heavy Duty Electric Wheelchair Lift for 2" Hitch Receiver, Hitch Mount for Class II+ Vehicles, 12V DC 7-Way Plug
The Rockland Foldable Electric Mobility Scooter Carrier is a heavy-duty lift designed to make transporting your wheelchair or scooter simpler. It mounts to a 2 inch hitch receiver on Class II vehicles or higher. This carrier is built for function, not flash, and it handles up to 350 pounds. The platform measures 38 inches long by 28 inches wide but can extend to 44 inches for larger scooters.
That extra length gives you more flexability when loading different models.
You control the lift with a single button. No more manual cranking or struggling to hoist a heavy scooter. Just press the button and the platform does the work. The system also includes an emergency manual backup hand crank. If your vehicle loses power or you have a electrical issue, you can still operate the lift by hand.
It is a practical safety net that keeps you from getting stranded.
The design folds up when not in use, saving space in your garage or storage area. The vertical tube also tilts down, so you can still open your trunk without removing the entire carrier. That is a nice touch for everyday use. Installation is straightforward. The unit comes with a 7-way plug, a license plate holder, and a warning LED light. No hardwiring is required. The standard plug connects quickly to your tow vehicle.
Mobility Carrier Wheelchair Scooter Rack Disability Medical Ramp Hitch Mount New
The Mobility Carrier Wheelchair Scooter Rack Disability Medical Ramp Hitch Mount New is built around a simple purpose: getting your scooter or wheelchair from point A to point B without the back strain. This is a hitch-mounted ramp and carrier combo, meaning you load the device onto the ramp, and the whole thing attaches to your vehicle’s hitch. No more lifting a heavy scooter into the trunk.
You get a heavy duty steel construction here.
This is not a flimsy aluminum ramp that flexes under load. The steel frame gives you a solid, stable platform every time you load or unload. To protect against rust and wear, the manufacturer applied a durable black powder coated finish. It holds up well against rain, road salt, and sun. Plus, the finish is smooth, so sliding the ramp in and out of the hitch is easy—no sharp edges to catch on your hands.
The ramp itself is designed to be easy to lift.
When you are not using it, the folding ramp can also be locked flat. That is a handy feature if you want to keep the ramp stored on the hitch without it flapping around while you drive. The locking mechanism is simple; you flip a pin and the ramp stays put. When you need it, just fold it down and roll your chair up.
Under the vehicle, the heavy duty folding hitch makes our carrier more rigid and stronger. A lot of hitch racks wobble, especially on bumpy roads.
Aluminum Wheelchair Carrier for Car, 500 lb Capacity, Tilt-A-Rack by Silver Spring
The Silver Spring Tilt-A-Rack Aluminum Wheelchair Carrier for Car is built to handle a 500 lb capacity, making it a solid choice for heavier power wheelchairs or scooters. It is manufactured from high-strength, lightweight aluminum, so you get durability without adding a ton of extra weight to your vehicle.
The main feature here is how it loads. The rack tilts and an integrated ramp slides out from under the platform. You don’t need to lift the wheelchair up high.
You just tilt the rack down, slide out the ramp, and roll the chair on. It’s a much easier process than trying to muscle a heavy chair into a trunk or onto a standard hitch rack. The platform itself measures 60 inches long and 32 inches wide, which should fit most standard wheelchairs. The loading ramp is 52 and a half inches long, giving you a gradual slope to work with.
This carrier is designed to work with Class III or IV 2 inch hitch receivers.
So you will need to make sure your car or SUV has that setup. It does not work with smaller 1.25 inch hitches. Once the wheelchair is loaded and secured, you can tilt the rack back up into the driving position. When you aren’t using it, the whole rack folds flat against your vehicle. This helps with parking and keeps it out of the way when you are just driving around town.
There is also an anti-rattle pinch bolt included. This is a simple but important part.
Harmar Mobility Upgraded AL500 Power Wheelchair Lift Outside Fully Automatic Carrier with II/III Hitch Adapter & Wiring Harness
The Harmar Mobility Upgraded AL500 Power Wheelchair Lift Outside Fully Automatic Carrier with II/III Hitch Adapter & Wiring Harness is built to handle the heavy lifting—literally. This lift is designed to carry a wide range of power wheelchairs, so you do not need to worry about your specific model fitting. It works with most standard power chairs right out of the box.
One of the best parts? No wheelchair modifications are needed.
You do not have to drill, weld, or alter your chair in any way. The lift grabs onto the wheelchair securely, and you are ready to go. This saves you time and keeps your equipment in its original condition.
The system includes a motor cover with a key lock and a toggle switch. This gives you some security and control. You can lock it up so only you operate the lift. There is also a license plate holder and a light built into the cover.
That means you keep your plate visible and stay legal on the road. No extra brackets or add-ons needed.
Power lifting is the main event here. The AL500 lifts your wheelchair automatically. When the chair is unoccupied, the lift folds up by itself. This makes loading and unloading pretty simple. You do not have to struggle with manual cranks or heavy straps. Just position the chair, hit the switch, and let the lift do the work.
Power Chair Carriers For Cars Buying Guide
Transport your wheelchair easily using power chair carriers for cars with ramps. If you’ve ever struggled to lift a heavy power chair into your trunk, you know teh frustation. Your back aches, your arms tire, and you wonder if there’s a better way. There is. A dedicated carrier takes the strain out of travel, turning a difficult chore into a smooth, simple process. But not all carriers are the same. Some work better with your vehicle type, others are easier to operate alone. The key is finding one that fits your lifestyle without breaking your budget.
Your Vehicle’s Hitch Class
Before you buy anything, check your car’s hitch. Most power chair carriers need a Class II, III, or IV hitch. A Class I hitch (commonly found on small sedans) usually can’t handle the weight. Look at your owner’s manual or measure the receiver opening. A 1.25-inch opening is Class I or II, while 2-inch is Class III or IV. Mismatching these can lead to unsafe driving conditions.
Weight Capacity vs. Your Chair’s Weight
This one trips people up. Your power chair might weigh 250 pounds, but the carrier plus the chair together need to stay under the carrier’s limit. Always add 20 to 30 pounds for the carrier itself. If your chair is 300 pounds, a carrier rated for 350 pounds leaves no room for error. Go higher if you can—safety first.
Ramp Style and Ease of Use
Carriers come with different ramp designs. Folding ramps are compact but can be tricky to deploy alone. Telescoping ramps slide out smoothly and are easier for one person. Test the ramp angle too—steeper ramps make it harder to push a chair up. A gentle slope saves your energy.
Security and Anti-Theft Features
Your carrier holds expensive gear. Look for locking pins, hitch locks, or integrated cable locks. Some models include a ramp lock to prevent the chair from rolling back. If you park in public areas, these features give peace of mind. A simple pin is cheap to replace a stolen chair is not.
Ground Clearance During Travel
Once installed, the carrier hangs below your bumper. On steep driveways or speed bumps, it can scrape. Measure your vehicle’s ground clearance and compare it to the carrier’s lowest point. Adjustable carriers help, but some sit lower than others. Test this before a long road trip.
Frequently Asked Questions About Power Chair Carriers For Cars
Will a power chair carrier work with my car?
Most carriers fit cars, SUVs, and minivans with a standard hitch reciever. Check your vehicle’s towing capacity first. You need a class II or class III hitch for most models. Some carriers also work with trunk-mounted racks. Always measure your power chair too. Weight and size matter a lot.
How much weight can these carriers hold?
It depends on the model. Lightweight carriers hold up to 250 pounds. Heavy-duty ones can support 400 pounds or more. But your car’s hitch has limits too. Never exceed the lower of the two ratings. Your power chair’s battery weighs extra. Factor that in.
Can I load the carrier by myself?
Some carriers make it easy. You get ramps or lift mechanisms. Others need two people. Look for a carrier with a low ramp angle or a powered lift. That helps if you have limited strength. Test the setup at home before you travel.
Do I need to remove the battery or seat?
Not always. Many carriers hold the chair whole. But check the height clearance. Your chair might hit the ground or trunk. Some chairs need the battery removed for balance. Read the manual for your specific chair and carrier.
Will the carrier block my license plate or lights?
Yes, it often does. You need a license plate bracket and light kit. These are sold separately. They keep you legal on the road. Some carriers include them. Others require a purchase. Don’t skip this step.
How do I secure the power chair?
Use straps that come with the carrier. Tie down all four corners. Also strap the wheels. Check for movement after a short drive. Re-tighten if needed. A loose chair is dangerous.
Can I use the carrier with a wheelchair van?
Yes, but watch the hitch height. Vans sit lower to the ground. You might need a drop hitch. Test clearance before you buy. Some carriers also work with side-entry ramps.
How do I maintain the carrier?
Keep it clean and dry. Lubricate moving parts twice a year. Check bolts for rust or loosness. Store it indoors when not in use. That extends its life.
Our Final Words
Getting your chair to any destination requires a trusted power chair carrier for cars. You need something that works every time without fuss. Think about how you load and unload your chair on a daily basis. A good carrier makes that process smooth and quick. You don’t have to struggle or ask for help. It just works. That gives you more freedom to go where you want when you want. Check teh weight limit and the fit for your vehicle before you buy. Also look at how easy it is to operate. Some models let you use a remote control. Others are more manual. Pick the one that feels right for you.
Your power chair is an important part of your life. A reliable carrier keeps it safe and ready to go. You deserve a system that doesn’t add stress to your day. Take your time looking at options. Read reviews from people who use them. Ask questions if something is unclear. The right choice will save you time and energy in the long run. These power chair carriers for cars are built to handle real daily use. They help you stay active and independent. That is what really matters at the end of the day.