Replace lost remotes easily to control your lift chair functions again. You know the frustration when you can’t find that little remote just when you need it. A proper remote for a lift chair puts you back in command of your comfort. It lets you recline, raise the footrest, or stand up smoothly. You don’t want to be stuck searching cushions forever. Getting a replacement is simple and affordable. You’ll feel relieved having that control back in your hand.
Finding the right remote doesn’t have to be a hassle. You just need one that matches your chair’s brand and model. Most work with standard lift chair systems. It connects quickly and feels familier. Soon you’ll be relaxing without worry. Your chair works like new again. So take that small step toward convenience. You’ll wonder why you didn’t replace it sooner.
Product Comparison Table: 10 Best Remote For A Lift Chair
| Image | Why We Like This Product | Editor’s Rating | |
 |
Fresayerd Lift Chair Remote Replacement, 5 Pin 2 Lighted…
|
9.7 |
Read Review |
 |
Fromann Recliner Remote Hand Control 2 Button 5 pin…
|
9.5 |
Read Review |
 |
Fruhdi Lift Chairs Power Recliners 2 Button 5 Pin…
|
9.3 |
Read Review |
 |
CUGLB Lift Chair Remote Replacement, 5 Pin 2 Buttons…
|
9.0 |
Read Review |
 |
AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride…
|
8.8 |
Read Review |
 |
Hommoat 2 Button 5 Pin Hand Remote Control for…
|
8.6 |
Read Review |
 |
Fruhdi 4 Button 5 Pin Prong Hand Control Handset…
|
8.4 |
Read Review |
 |
Hommoat 4 Lighted Buttons 5 Pin Remote Replacement with…
|
8.1 |
Read Review |
 |
Muhubaih 8 Female Pin Hand Remote Control for Massage…
|
7.9 |
Read Review |
 |
Kariwust 2 Button 5 Pin Remote ZK1200-HC Hand Control…
|
7.7 |
Read Review |
Quick Review For Top 10 Remote For A Lift Chair
Fresayerd Lift Chair Remote Replacement, 5 Pin 2 Lighted Button Hand Control with 6Ft Cord for Power Lift Recliner Chairs Accessories, Recliner Control Replacement Parts
The Fresayerd Lift Chair Remote Replacement is a 5 pin 2 lighted button hand control with a 6ft cord, designed for power lift recliner chairs. It is built to be a simple fix for a broken or worn out remote.
This remote works with most chairs that use a 5-pin circular plug. If your lift chair, medical recliner, or home theater seat has that connector, this is likely a good fit.
The wide compatibility means you dont have to worry about finding a brand-specific part for your chair.
The design focuses on ease of use. There are only two buttons for up and down, so operation is straightforward. A weak blue backlight makes the buttons visible in low light, which is helpful for elderly users or anyone with limited mobility. You can adjust your chair without fumbling around in the dark.
Durability is a key feature here.
The remote is made from premium ABS material, so it can handle drops and daily wear. It is built to last, giving you a long term solution for your recliner or lift chair.
Installation is a breeze. It is a plug-and-play setup with no tools needed. The extended six foot cable gives you plenty of reach to connect to your chair’s motor. Just plug it in and you can control your recliner right away.
Fromann Recliner Remote Hand Control 2 Button 5 pin for Electric Power Lift Sofa Chair
The Fromann Recliner Remote Hand Control 2 Button 5 Pin is a replacement remote designed for electric power lift sofas and chairs. This is a straightforward control unit. It uses a 5 pin connection to link directly to your chair’s motor. It works with a single motor system only. So if your chair uses two motors for separate functions, this remote will not be the right fit.
The remote has two simple buttons. One for the up function and one for the down function.
These two buttons control the reclining and lifting motions of your chair. You press up to raise the footrest or lift the chair. You press down to lower it back to a seated position. There are no complex menus or settings. Just simple push-button operation.
This hand control uses a straight connector with a 90 degree angle plug at the end. This angled plug helps keep the cord flush against the chair frame. It reduces strain on the connection point.
The remote plugs directly into the motor’s port. It is designed to be swapped out easily if your old remote stops working.
One of the key features is its compatability with many different brands of power recliners and lift chairs. While it is a Fromann product, it often works with other brands that use a standard 5 pin motor setup. However, you should check your current remote’s connection type before buying.
Fruhdi Lift Chairs Power Recliners 2 Button 5 Pin Prong Remote Handset Controller Hand Control with USB and Backlight
The Fruhdi Lift Chairs Power Recliners 2 Button 5 Pin Prong Remote Handset Controller Hand Control with USB and Backlight is a straightforward replacement part for your power recliner or lift chair. It is designed to be simple and functional, getting you back in control of your chair without any fuss.
This remote features a long black housing with two large black buttons. One button moves the chair up, the other moves it down.
That is all you need for the basic lift and recline functions. The buttons are big enough to press easily, even if your hands are not as strong as they used to be. A useful addition is the built-in backlight. This means you can see the buttons clearly in a dark room, which is handy for late-night adjustments. There is also a USB port on the side of the remote. You can plug in your phone or tablet to charge it while you relax.
It is a small convienence that makes a big difference.
Compatibility is a key strength of this hand control. It works with many popular chair motor brands, including Okin, Limoss, Kaidi, Mulin, and FBS. It is also designed to fit a wide range of recliners and lift chairs that use a standard 5-pin round plug. For example, it can replace hand controls like the ELEASMB7337 or the MLSK111-A1.
CUGLB Lift Chair Remote Replacement, 5 Pin 2 Buttons Straight Power Recliner Remote, Power Recliner Replacement Compatible for Most Lift Chair Brands
The CUGLB Lift Chair Remote Replacement is a 5 pin, 2 button straight power recliner remote designed to be a simple, no-fuss fix for your lift chair. If your current remote is broken or lost, this one might be exactly what you need. It focuses on getting the job done without any extra complexity. This remote is built to be universal and durable. It works with most brands that use a straight plug and a round 5 pin connector. The two buttons control up and down functions.
The build quality is good, making it strong enough for daily use. You don’t have to worry about it breaking easily. It is widely used across many popular brands. This includes Okin, Tranquil Ease, Limoss, Golden, Pride, Med, Med-Lift, Berkline, Serta, Mcombo, KD, and Bride lift chairs. It also works with power recline models using DeltaDrive and BetaDrive motors. That is a lot of compatibility, so it likely fits your chair. The design is easy to handle.
It is a simple upward and downward hand control. It works with hand controls that have a quick disconnect or those that do not. That makes it easier for you to use your lift chair without any hassle. For convenience, the remote measures 6.6 x 1.9 inches. The cord length is between 59 and 68 inches. This gives you plenty of reach. It is easy to organize and can be operated with either your right or left hand. The 90 degree angle plug frees up space.
AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride VivaLift Lift Chair (Standard & Early Version Viva Lift 2) – (CTL1707190) for Standard & Early Version VivaLift 2 Models
The AlveyTech 10-Button 5-Pin Replacement Remote Hand Control for Pride VivaLift Lift Chair is a direct replacement part designed for specific models. This remote is manufactured by Pride Mobility with part number CTL1707190. It is built to work with standard models of Pride VivaLift chairs, including the Atlas, Elegance, Escape, Legacy, Metro, Tranquil, and Urbana. It also works with some early version VivaLift 2 chairs.
If you have a later version VivaLift 2 chair, this remote will not work for you.
There is an important difference between the versions. Standard and early version VivaLift 2 models use a 10-button controller. Later version VivaLift 2 chairs use a 12-button controller. These two types are not interchangeable. Please check your current remote or the images to make sure this 10-button model is the correct one you need.
This hand control is not compatible with Ultra, Radiant, or later VivaLift 2 models.
This remote controls all the movements of your lift chair. It has ten buttons that adjust the headrest, lumbar support, back position, and leg rest functions. It also includes separate buttons for up and down lift control. Each function is clearly labeled, so you can fnd the right button without searching.
Installation is quick and easy.
Hommoat 2 Button 5 Pin Hand Remote Control for Power Lift Chair & Power Recliner, Replacement Remote Handset with 2 Lighted Buttons CD001 (Black)
The Hommoat 2 Button 5 Pin Hand Remote Control for Power Lift Chair & Power Recliner, Replacement Remote Handset with 2 Lighted Buttons CD001 (Black) is a straightfoward replacement for your chair’s old remote. If your power recliner or lift chair uses a 5-pin plug, this remote should work as a direct swap.
It meets CE, ROHS, FCC, and UL standards, so you can trust it’s safe and reliable.
The two buttons are made from rubber, which gives you a soft, comfortable feel when you press them. No more stiff or slippery controls. Each button is lit with a built-in green light, making it easy to find in the dark.
You won’t have to fumble around when you want to adjust your chair at night—the glow is subtle but helpfull.
The remote comes with a coiled cable that stretches from 59 to 67 inches. That gives you plenty of slack, no matter how you’re sitting. You can hold the remote in your hand or set it beside you without feeling tethered. The cable retracts neatly when not in use, keeping things tidy.
The ergonomic shape is designed to fit your hand naturally.
Fruhdi 4 Button 5 Pin Prong Hand Control Handset Remote with USB and Backlight for Lift Chairs Electric Sofa Power Recliners
The Fruhdi 4 Button 5 Pin Prong Hand Control Handset Remote with USB and Backlight for Lift Chairs Electric Sofa Power Recliners is a replacement remote designed to get your lift chair or power recliner working again. It has a long black housing and four large buttons that are easy to find and press, even if your hands arent as steady as they used to be. The buttons are backlit, so you can see them in a dark room without fumbling around.
A nice bonus is the built-in USB port on the side, which lets you charge your phone or tablet while you relax.
This remote is built to work with motors from brands like Okin, Limoss, Kaidi, Mulin, and FBS. But you need to be careful. In some cases, the control buttons might be reversed from what the label says, or the buttons might stop working all together. For example, we have seen this happen with the Ashley Yandel Lift Chair remote model HSW304C-B-KBA and the Motomotion Senior Chair.
So, if you have one of those specific models, there is a chance this remote wont work right for you.
The most important thing is the connector. This remote uses a 5 pin round male plug with a straight plug connector. It is a standard 5 pin, but it is not compatible with motors that have a 5 pin connector with raised lips or a plastic housing around the prongs.
Hommoat 4 Lighted Buttons 5 Pin Remote Replacement with USB Charge Port for Dual Motor Lift Chair and Power Recliner DL-SK-109-2-002
The Hommoat 4 Lighted Buttons 5 Pin Remote Replacement with USB Charge Port for Dual Motor Lift Chair and Power Recliner DL-SK-109-2-002 is a simple, direct replacement controller for your lift chair or power recliner. Before you buy, its really important to check compatibility. Look at your original remote: the button icons should match, and you need a straight round male 5-pin plug—exactly like the one shown in the product image.
Also, your chairs remote model number should be DL-SK-109-2-002. This remote works as a replacement for the Ashley1090012 or the HSW304 4-button controller. If it’s not compatible, the remote simply wont work with your chair.
This remote has four lighted buttons made of soft rubber. They’re more comfortable to press and easy to operate, even if your hands are a bit weak. The built-in lights are a real help in the dark.
You can find the controller quickly without fumbling around for a lamp or your phone light. The buttons are clearly labeled and respond with a nice, tactile feel.
The cable is nice and long—between 47 and 55 inches total. That gives you plenty of slack no matter where you sit or how you position the chair. You won’t feel stuck or have to stretch to reach the control. It just lays where you need it.
A handy extra is the built-in USB charging port on top of the remote.
Muhubaih 8 Female Pin Hand Remote Control for Massage Power Lift Recliner Chair, for DN-03 Heat & Vibration Controller for Chair, with 30 in Length Extension Connection Cord 12VDC
The Muhubaih 8 Female Pin Hand Remote Control for Massage Power Lift Recliner Chair is a replacement remote designed specifically for the DN-03 Heat & Vibration Controller. It is not a universal part, so you must check your chair first. This remote controls four massage zones: your back, lumbar, thighs, and legs. It also handles the heating function. The key is compatibility.
This remote only works with chairs that have a circuit board marked “DN-03.” It requires an 8-pin plug with the exact wire sequence as your old controller. If your old remote is lost or the wiring looks different, do not buy this one. Double check the product images to match the wire order before ordering.
The remote has nine buttons and a smart controller. You get five different vibration modes to choose from, so you can find a rhythm that feels good.
There are three timer options: 10, 20, or 30 minutes. This lets you set it and relax without worrying about turning it off. You can also adjust the intensity to two different levels. The heating feature is simple with a one-click on and off button. It syncs with the chair’s four motors and the heating pad at the same time. The housing is made from durable ABS, so it can handle a few drops.
Kariwust 2 Button 5 Pin Remote ZK1200-HC Hand Control Replacement for Golden with USB and Backlight for Lift Chair Power Recliner
The Kariwust 2 Button 5 Pin Remote ZK1200-HC Hand Control Replacement for Golden with USB and Backlight for Lift Chair Power Recliner is a straightforward switch control designed for the up and down function of your lift chair. If your current remote has worn out or stopped working, this is a simple replacement that gets the job done.
This remote is a universal fit for Golden Technologies model ZK1200-HC, but it also works with many different brands of lift chairs.
It is compatible with RMT, Dewert, Limoss, and Kaidi motors, which are common in these chairs. So you don’t have to worry if your chair is not a Golden brand—chances are this will work just fine.
One of the handy features is the built-in USB port. You can charge your phone or tablet right from your chair. No need to reach for a wall outlet across the room. It makes life a little more convenient, especially when you are relaxing. The remote also has a backlight on the buttons.
If you need to get up in the middle of the night, you can clearly see which button is up and which is down. The buttons light up, so you don’t have to fumble around in the dark.
The cable length is adjustable between 40.5 and 62.2 inches. That is plenty long enough to let you control the chair from different positions. Whether you are sitting, reclining, or standing nearby, you can keep the remote where it is comfortable for you.
Remote For A Lift Chair Buying Guide
Finding teh correct remote for a lift chair ensures smooth operation and user independence. It is the main way you control comfort and movement. But not all remotes are the same. Some are simple, others are packed with options. You might want something that is easy to hold. Or maybe you need a remote that works from across the room. The wrong choice can lead to frustration. The right one makes life easier. Think about who will use it most. That will guide your decision.
Button Size and Layout
Are the buttons easy to press? Large, raised buttons work best for people with limited hand strength or vision issues. A simple layout avoids confusion. You don’t want to search for the right button in the dark. Some remotes have backlit buttons, which is a nice touch. If the user has arthritis, a remote with soft-touch buttons can be a lifesaver. Avoid models with tiny, crowded controls. They are hard to use.
Wired vs Wireless Connection
A wired remote stays attached to the chair. That means you won’t lose it. But the cord can get in the way. Wireless remotes offer freedom. You can keep it on a table or clip it to your chair. However, you need to replace batteries now and then. Think about what fits your daily routine. A wireless option is great if you move around a lot. A wired one is more reliable if you stay put.
Mounting and Storage Options
Where will you put the remote? Some come with a clip or a holder. You can attach them to the armrest or the side of the chair. This prevents them from sliding off or getting lost. A remote with a long cord is helpful if you need to reach it from the bed. Look for models that offer flexible placement. A simple hook or velcro strap can make a big difference.
Compatibility with Your Chair
Not every remote works with every chair. Check the brand and model of your lift chair before buying. Some remotes are universal, but most are specific to one manufacturer. Look for a matching connector type. If you are unsure, contact the chair maker. A mismatched remote can cause malfunctions. It is better to double-check than to deal with a return later.
Frequently Asked Questions About Remote For A Lift Chair
How does the remote for a lift chair work?
It’s simple. You press a button to move the chair. Most remotes have two main buttons. One lifts the chair forward. The other brings it back down. Some remotes also control the recline feature. The remote connects to a motor inside the chair. You just push and hold the button untill the chair is where you want it.
Is the remote easy to use for someone with arthritis?
Yes, many remotes are designed for you. They have large buttons. The buttons are soft to press. You don’t need much strength. Some remotes even have a paddle-style button. You can push it with your palm or arm. That makes it easier if your hands are weak. Look for a remote with big, clear labels.
Can I replace a broken remote?
Most times, yes. You can order a replacement remote. But you need to check the brand and model of your chair. Remotes are not all the same. They are made for specific motors. If you get the wrong one, it won’t work. Contact the chair manufacturer. They can tell you which remote fits. Some remotes are universal, but its best to confirm.
Do remotes come with batteries?
It depends on the remote. Some remotes have a built-in battery. You recharge it with a cable. Others use standard batteries like AA or AAA. Check the product details before you buy. If you get a remote with replaceable batteries, you’ll need to change them over time. Rechargeable ones are more convenient.
How long does the remote battery last?
Battery life varies. For rechargeable remotes, it can last a few months between charges. It depends on how often you use the chair. If you use the lift function many times a day, the battery drains faster. For battery-powered remotes, thay can last a year or more. Always keep a spare remote or batteries handy, just in case.
Can I use the remote if I have a pacemaker?
Most remotes are safe. They use low-voltage signals. But you should talk to your doctor first. Some remotes have wireless features. These might interfere with medical devices. Stick with a wired remote if you’re worried. Wired remotes have no signal to cause issues. Always be cautious and ask your healthcare provider.
What if the remote stops working?
First, check the batteries. Replace them if needed. Then make sure the remote is plugged in properly. For wired remotes, check the cable for damage. If it still doesn’t work, reset the chair. Unplug it for a minute, then plug it back in. If that fails, contact the manufacturer. They can help you troubleshoot or send a new remote.
Our Final Words
Simple control brings independence back, making daily moves easier and safer. When you choose a lift chair, teh remote matters just as much as the chair itself. A good remote lets you find your perfect position with one hand. No struggling with hard-to-press buttons or confusing layouts. You deserve a remote that works without thinking, letting you focus on relaxing. We want you to feel confident and comfortable every time you use your chair.
The best option is a remote for a lift chair that feels natural in your hand. Look for one with large buttons and a simple design. Many models even include a battery backup, so you are never stuck if the power goes out. Take your time picking the right control. A small choice now can make a big differnce in your daily comfort and freedom.